|
 |
Poison Spyder JK Rocker knockers are created with an exclusive oval dimple die pattern. This one of a kind dimple works in concert with the Jeep Wranglers body lines and adds rigidity to the rockers slider plate. Rocker knockers are crafted with 1.75" X .134 wall DOM as the base slider bar, with an 1.5" X .125 wall DOM slider frame. Completed with 3/16" laser plate body and slider platform. Mounting hardware includes 3/8" button head and 1/4"countersunk flat head stainless bolts. Jeep rockers are available in black powder coat and bare steel. |
| |
|
 |
Spyder customs JK Rocker knockers secure with a series of 3/8" stainless button head hardware on the lower body platform. The slider plate is further mounted with 1/4" stainless flat head bolts. Additionally rockers bolt through the factory holes in pinch seam. Jeep Wrangler armor can be mounted exclusively to factory securing locations for an easy install, or rockers have additional mounting provisions for sever off road usage. This is highly recommended for the slider models. Jeep rock sliders are compatible with all known suspensions and body lifts. This includes long arm kits, no body separation will occur between the body and rockers when a body lift is installed. As an added attribute the body platform is constructed with drain reliefs preventing major debris from collecting in the lower body cavity. Image displays a two door Rocker knocker without slider used together with optional body armor. |
| |
|
 |
Another quality element of the Poison Spyder Rocker knocker is that ability to remove the outer slider skid. The outer skid is built from 1/8" steel and is secured to a 3/16" base plate welded into the slider hoop assembly. Slider does not rely on skid for structure. The advantage of having the ability to remove the skid, is to allow you to replace it if it becomes damaged to a level that it has lost its aesthetic appearance or functionality. Also for you to be able to customize the sliders to match your Jeep, and to easily be able to remove it for re-finish. In this image slider plate is painted yellow to match Jeep's base color, picture displays a four door Rocker knocker with slider used together with optional body armor. |
| |
|
 |
The Rocker knockers main slider tube is angle cut to allow for larger tire clearance both in static stance and during suspension articulation. The slider is further refined with a rounded and finished edge allowing tire contact if it occurs. The Jeep JK's body can easily be trimmed at the body pinch to match the rock sliders angle. |
| |
|
 |
Poison Spyder JK sliders can be utilized as a stand alone armor component or can be used in conjunction with our body armor. Body armor is a secondary line of defense against off road damage to your Jeep, protecting the Jeep by reaching above the slider level up to the door line. Rocker knockers do not mount or use the body armor for additional structure. |
| |
|
 |
Rocker knockers are available in both two door and four door models. Display image presents a two door Rocker knocker with slider in our standard black powder coat. A florescent green panel has been placed behind the Spyder icon prior to final installation. Rocker is shown mounted without optional body armor. This is also an example of a Jeep that has not been trimmed at the body pinch seam ( at each end of the Rocker knocker ) to match slider tube angle. This trimming modification is not required for every Jeep, only if to allow for larger tire clearance both in static stance and during suspension articulation. |
| |
|
 |
This image shows a four door model Rocker knocker in our standard black powder coat. This model also brandishes a water jet cut Spyder logo nestled between the front and rear doors. Rocker is shown mounted with optional body armor for maximum impact and damage protection. Spyder on the Rocker knocker and body armor has been enhanced by allowing body color ( yellow ) to show through. Jeep is equipped with Rubicon express long arm suspension, full movement and mounting is uninhibited by rock slider.
|
| |
|
 |
Rocker knocker's are also available in a no slider option for both the two and four door Jeep JK's. The supporting image displays a Rocker knocker without slider welded to the base tube, in our standard black powder coat. Furthermore this Jeep is not equipped with optional body armor. This rocker option is desirable for the Jeeper that is looking for upgraded protection from the factory Rubicon rocker package, or a slider that is a little more incognito than our rocker with slider design.
|
| |
|
|
|
This image presents another possible combination with the Poison Spyder JK rocker armor system. Shown is a two door Rocker knocker without slider, used in unification with optional body armor. This teaming of components allows for excellent protection in a less aggressive composition.
|
| |
  |
